Feynlab® The Original Ceramic Coating

INSPIRED BY NATURE In nature, you may have heard of the Lotus Effect. The lotus effect refers to self-cleaning properties that are a result of ultra-hydrophobicity as exhibited by the leaves of Nelumbo, the lotus flower. Dirt particles are picked up by water droplets due to the micro and nanoscopic architecture on the surface, which minimizes the droplet’s adhesion to that surface. Sound familiar? Feynlab was inspired by this amazing show put on by nature and used this inspiration to recreate these properties in a nano ceramic coating that can produce similar hydrophobics on most any surface it is applied to. When applied to the paint of a vehicle, these hydrophobics perform just as they do in nature, with the water beads encapsulating dirt, helping to remove it as it rolls off the surface. This, in turn, keeps that surface cleaner for longer, with its “self-cleaning” effect, and makes maintenance easier. HYDROPHOBIC The Original Ceramic by Feynlab has one of the highest water contact angles in the industry, making it super-hydrophobic, which helps to protect your car from the contaminants commonly found in water. This property provides your car paint with a permanent layer of protection by forming a chemical bond with it, which causes it to repel not only water, but other elements such as oils, fallout, dirt, mud, road grime, and other build-ups from daily use of the vehicle. This makes your car surface much easier to clean and maintain, as these elements are not able to bond to the surface through the coating. You also get that super cool water beading effect, which is a plus! SELF CLEANING If washing your vehicle every time it gets nasty dirt and grime sticking to the surface hurts your arms and wears you out, then THE ORIGINAL CERAMIC is a product that will help you out! It will save you time, arm and back pain, AND money! This DIY ceramic coating has such a high-water contact angle that spraying the surface with water will cause the dirt to be encapsulated and rolled off the surface! (If maintained properly and as instructed) Did we mention the satisfaction you get from watching the dirt just roll off the paint? BENEFITS Economical Economical Performance Performance Simple Simple Hydrophobic Hydrophobic Versatile Versatile Ultra-thick Ultra-thick Unparalleled Unparalleled APPLICATION INSTRUCTIONS Properly Prep vehicle by washing with Feynlab Pure Wash or Feynlab Pure Rinseless Clay and Paint Correct surface if necessary When vehicle is ready to coat, make sure it is located in a well-lit, well-ventilated area that is between 50°F – 85°F (10°C – 30°C). BEFORE COATING – Shake the bottle VIGOROUSLY for one minute. Then, apply enough THE ORIGINAL CERAMIC to a microfiber sponge applicator to fully cover a single panel such as a door or half a hood. Begin by making a “ ” (plus) sign in the middle of the panel and follow that with a picture frame around the area you are coating. Next, fill in the remaining panel in straight lines from left to right and then cross-hatch up and down, making sure to create a level layer with even coverage. APPLICATION INSTRUCTIONS (Cont.) Allow the coating to sit on the panel until about 75% dry, or until you see “rainbows”, similar to an oil sheen on water. This is a good indicator you are ready to move on to the next step. Once you are ready to move to the next step, use a clean microfiber towel (edgeless is recommended) and remove the remaining 25% of the unevaporated coating. Use a second clean microfiber towel to wipe clear if needed. You will begin to feel the towel glide easier and easier across the surface as the product is completely removed. Repeat the above process panel by panel (or multiple panels if your conditions allow) until the entire vehicle is coated. One layer of THE ORIGINAL CERAMIC is sufficient to achieve the one-year warranty, but additional layers may be applied to areas where additional protection is desired, such as leading edges, hoods, etc. Wait at least one hour between layers, but no more than 3 hours. Frequently Asked Questions What is feynlab ceramic coating? Feynlab ceramic coating is a liquid polymer that chemically bonds with vehicle paint to create a protective layer. This ceramic coating forms a hydrophobic barrier that repels water, dirt, and contaminants while enhancing gloss and depth. The silica-based formula provides superior durability compared to traditional waxes and sealants, lasting over one year with proper application. What's the difference between ceramic auto coating and wax? Ceramic auto coating chemically bonds to paint surfaces and lasts 1 years, while wax sits on top and requires reapplication every few months. The Original Ceramic Coating provides superior protection against UV rays, chemicals, and environmental contaminants. Wax offers temporary shine but cannot match the durability and hydrophobic properties of ceramic coatings. Does vehicle ceramic coating work for daily drivers? Vehicle ceramic coating excels on daily drivers by reducing wash frequency and making maintenance easier. The Original Ceramic Coating creates a slick surface that prevents dirt adhesion and allows contaminants to rinse away more easily. Daily driving conditions like road salt, bird droppings, and tree sap have less impact on coated surfaces. How long does the longest lasting ceramic coating last? The Original Ceramic Coating carries a 1 year warranty but often exceeds this timeframe with proper maintenance. Customer reviews report durability extending well beyond the warranty period, with some installations lasting over two years. Longevity depends on environmental conditions, maintenance frequency, and proper application preparation. Is 1 year ceramic coating safe for paint? The 1 year ceramic coating is completely safe for automotive paint when applied to properly prepared surfaces. This ceramic coating actually protects paint from UV damage, oxidation, and chemical etching. The formula contains no harsh solvents that could damage clear coat or paint finishes. For surface preparation, consider our prep spray. What finish does professional grade ceramic coating provide? Professional grade ceramic coating delivers a deep, glossy finish that enhances paint depth and clarity. The Original Ceramic Coating creates a mirror-like reflection while maintaining the original paint color characteristics. The finish appears wet and glossy immediately after application and maintains this appearance throughout its lifespan with regular washing. Where can ceramic coating car applications be applied? Ceramic coating car applications work on all exterior painted surfaces including panels, bumpers, mirrors, and trim pieces. The Original Ceramic Coating bonds to clear coat, single-stage paint, and properly prepared bare metal surfaces. It can also be applied to glass and hard plastic components for comprehensive vehicle protection. How do you maintain the best ceramic coating results? Maintaining the best ceramic coating results requires regular washing with pH-neutral soap and avoiding harsh chemicals or abrasive materials. The Original Ceramic Coating benefits from periodic maintenance washes and immediate removal of bird droppings or tree sap. For optimal care, consider our car wash soap. Related Products Leveling Agent Ceramic Plus Prep Spray Marine Ceramic Coating Self Healing Ceramic Coating Hybrid Ceramic Coating